Katy Mold & Indoor Air Quality

A patented dry fog process for mold and indoor air quality concerns. No demolition. No reconstruction. Most homes done in a single visit.

⭐⭐⭐⭐⭐ 25 Five-Star Google Reviews

Mold in your Katy home? Let's figure out what you're actually dealing with.

A musty smell that won't go away. A spot on the ceiling. Maybe a family member who feels better every time they leave the house. Whatever brought you here, here's the first thing worth knowing: you don't always have to tear your home apart to deal with mold.

We use a patented dry fog process that reaches mold where it actually lives, in the air and the hidden spaces behind walls, in vents, and in the corners you can't get to. No demolition. No reconstruction. Most homes are done in a single visit.

I'm Gus, the owner. My family started this company after mold in our own home made us sick for years, and the usual tear-out approach only made things worse. We know what it's like to be standing where you are now, just looking for a straight answer. Here's our story.

Here's the part most companies won't tell you: if the moisture causing the mold isn't fixed first, it comes back. My family learned that the hard way. So if I look at your situation and think you need a plumber or a roofer before you need me, I'll tell you. You'll get a straight answer either way.

How the dry fog process works

Most mold companies start with a demolition quote. We usually don't.

Our equipment turns an EPA-registered solution into a dry fog made of particles smaller than five microns. Because they're that small, they behave more like a gas than a spray. They travel the same paths airborne mold spores do, reaching surfaces and spaces that wiping and spraying never touch.

The word "dry" matters. The fog doesn't soak your walls or leave moisture behind, which is important because moisture is the whole reason mold grows in the first place. Plus, you're not living in a construction zone for a week. Most folks are back in their home the same day.

1

InstaPURE

The fog that goes everywhere

  • An EPA-registered sterilant turned into a dry fog
  • Particles are too small to condense, so they drift like a gas instead of falling like a spray
  • Goes where spores go: the air, behind walls, into vents, down in the corners
  • We start with your ductwork, then work room by room
  • Nothing gets wet, which matters, since moisture is the whole problem
2

EverPURE

The layer that stays behind

  • A microscopic antimicrobial layer that settles on your surfaces
  • No visible or tangible residue, nothing to wipe up
  • EPA-registered for 90 days of protection once it's applied
  • Sits on doorknobs, walls, and countertops waiting for whatever lands next

What neither step does is fix your water. If there's a leak or a humidity problem feeding the mold, that has to get handled or it all comes back. We'll tell you if we see one, even when the fix is somebody else's job.

~6 spores/m³

Measured after treatment by Element Labs

4-6 hrs

Most homes, start to finish

<5 microns

Smaller than a mold spore

1 visit

No demolition, no rebuild

Want the full walkthrough? Here's how the two-step VaPURE dry fog system works.

Why Katy homeowners call us

It's usually more affordable

No demolition and no rebuild means our process is often lower than the tear-out-and-reconstruct approach. We'll talk through real numbers for your situation before you commit to anything.

It's fast

Most homes take four to six hours, not the days or weeks a tear-out can drag into.

It's not invasive

No crews knocking out drywall, no dumpster in the driveway. The fog reaches into walls, vents, and tight spots without the mess that comes with traditional methods.

We stand behind it

Our work comes with a 12-month limited warranty. If covered conditions come back in that window, call us and we'll make it right. Ask us for the full details.

Mold in Katy: what we see around town

Katy’s flooding story isn’t like most towns'. The Addicks and Barker reservoirs were built in the 1940s to protect downtown Houston, back when this area was just open prairie. As Katy grew west, new neighborhoods popped up inside land meant to hold floodwater. When Hurricane Harvey hit, the Corps closed the gates to protect downtown, but water levels rose and flooded homes. Canyon Gate at Cinco Ranch has 721 homes inside this flood pool. In just the Canyon Gate and Cinco Ranch area, Fort Bend County reported about 3,000 damaged homes, including those in Kelliwood. Most families lived in Zone X, didn’t have flood insurance, and only learned they were inside a reservoir the same week their homes flooded. Later, a federal court called this a taking under the Fifth Amendment..

Harvey happened nine years ago. Most of those homes were dried out and repaired the right way. Still, we’ve seen enough flooded houses in this area to know what can go wrong if the drying process is rushed. Sometimes, the walls go back up a day or two too soon, and the house ends up with a faint smell that lingers for years and is hard to trace. Have we seen this happen in a Katy home? Not that we can say for sure. But we have found it in other parts of Houston, so it’s something to keep in mind if your house took on water and the repairs were done quickly.

Most days, the problems we see are less dramatic. In neighborhoods like Cinco Ranch and Nottingham Country, built during the 1990s boom, the original ductwork and bathroom fans don’t move air as well as they used to. Newer homes west of the Grand Parkway are sealed tight to save on electricity, but that means humidity builds up all summer in houses that rarely get opened up. The ground has changed too. The Katy Prairie once soaked up rain like a sponge, but now it’s mostly covered by rooftops and driveways, so water just sits. No matter the house, the main issue is always the same: moisture that lingers longer than it should..

Whether you own, rent out, or just moved here

We help Katy homeowners who notice a musty smell and aren’t sure where it’s coming from, buyers who want to know what’s behind the walls of a house that flooded in 2017 before they sign, landlords and property managers getting a rental ready for new tenants, and families moving in for Katy ISD who walk into their new place and smell something unexpected. Whether you’re in an established neighborhood off Mason Road or a new build west of the Grand Parkway, we’re happy to come take a look and give you honest answers about what’s going on..

We serve Katy from our office in Sugar Land, about 22 miles and 25 minutes up the Grand Parkway. We don’t have a storefront in Katy, and we’d rather be upfront about that. What we do have is a team that’s been handling moisture and air quality problems across this part of Texas for years, and Katy is an easy trip for us.

The U.S. Army Corps of Engineers put it to the test

We don't expect you to just take our word for it. Pure Maintenance worked with the U.S. Army Corps of Engineers at Fort Campbell, Kentucky on a six-month independent evaluation of the VaPURE dry fog process. The results confirmed it was effective at reducing airborne contaminants, reducing contaminants on surfaces, and keeping them from coming back over the evaluation period.

Read the case study

As Featured In

Bloomberg USA Today Yahoo Finance Markets Insider International Business Times

Questions people usually ask

Why does mold keep growing in my house?

Mold spores are floating in the air everywhere, all the time. They only become a problem when they land somewhere with moisture and start to grow. That's why fixing the moisture source matters as much as addressing the air. Handle one without the other and you're likely to see it again. Here's a fuller explanation.

Can't I just use bleach?

It's the first thing most people reach for, and it's mostly a myth. Bleach can make mold lose its color so it looks gone, but the spores often stay put, and the extra moisture can even feed more growth. Dealing with the moisture and the airborne spores does more than bleaching a surface ever will.

Is the dry fog safe for my family and pets?

The products are EPA-registered and used at controlled concentrations. Your home is empty while we work and gets aired out afterward, so plan for you and your pets to be out during the visit and the air-out period. We'll give you simple prep instructions ahead of time.

How long does it take?

Most homes take about four to six hours depending on size. The house needs to be empty while we work, so plan somewhere for you and your pets to be for the day.

Do I have to fix the moisture problem first?

If you want the result to last, yes. Mold comes back wherever moisture stays. If we spot a moisture issue during your evaluation, we'll point it out so you can get it handled, even if that means bringing in someone else first.

Tell us what's going on

Describe what you're seeing or smelling and we'll take a look. No pressure, no hard sell, just a straight answer about whether we can help. There's no charge for the first conversation.

I'm here to talk it through. Reach me directly at 281-220-1425. Gus

Written by Gus Pullen, owner of Pure Maintenance of Texas. Our family started this business after living through mold in our own home. Read our story.

Services

 

For more information, testimonials and research data visit PureMaintenance.com.

Contact

Pure Maintenance of Texas • 56 Sugar Creek Center Blvd. #160 • Sugar Land, Texas • 77478 • 281-220-1425

Pure Maintenance of Texas makes no representations or guarantees regarding health outcomes or medical benefits. Our services are not a substitute for professional medical advice, diagnosis, or treatment. If you have health concerns, please consult a licensed healthcare professional.